Buell 2007 FIREBOLT Service Manual page 177

HOME
DISASSEMBLY
NOTE
Record rider suspension settings before disassembly.
1. Remove front fork. See REMOVAL
f1905x2x
8983
1. Fork tube holder
2. Snap ring
3. Preload adjuster
4. Front fork assembly
Figure 2-64. Fork Tube Holder (B-41177)
2. See Figure 2-64. Clamp the FORK TUBE HOLDER
TOOL (1) (Part No. B-41177) in a vise and install the
upper part of the front fork in the holding tool.
3. Remove snap ring (2).
2-46 2007 Buell Firebolt: Chassis
in 2.16 FRONT FORK.
1
2
4.
3
After fully unthreading preload adjuster, gently pull on
4
adjuster.
1
5.
8984
Figure 2-65. Removing Preload Adjuster
See Figure 2-65. Remove preload adjuster by turning
counterclockwise.
NOTE
8985
Figure 2-66. Removing Fork Cap From Outer Tube
See Figure 2-66. Remove fork cap from outer tube.