Table of Contents
Advertisement
Terminal Server - User and Administration Guide
9.8 Host Address
Menu
9.9 Kill
Command
100
host
The Destination field is a host IP address and
only packets for that host are allowed across
the gateway.
default
Any IP address allowed across the gateway
<dot notation
Only addresses fitting the numerical mask
value>
are allowed across the gateway.
The Terminal Server uses the information entered on the Host
Address Menu to form an internal host table. The user can
then use the host name in any of the server's functions or
menus.
** Administrator **
Entry Host name
1
[mark
]
2
[astro
]
3
[router
]
4
[bbox
]
________________________________________________________________________________
Figure 40: Administration - Host Address Menu.
The parameters are as follows:
This field specifies local name you want to give
Host name
a particular host on the network.
This field defines the IP address of the host
IP Address
designated above.
The kill command resets the port but keeps the previously
defined configuration. This is used when you change certain
parameters or for when ports get stuck.
HOST ADDRESS MENU
IP Address
[204.17.209.70
]
[204.17.209.6
]
[204.17.209.254
]
[204.17.209.1
] and so on...
REMOTE-ADMIN
Advertisement
Table of Contents
