The following fields are important:
6.6 Tips
Hunt groups
Type:
The name of the modem assigned to a specific
port. It is referenced from the Remote Access
Systems Screen in the Device type field.
Dst Address:
The address of the remote system the Terminal
Server is calling into.
Config:
The modem's initialisation string. There are a
few examples at the end of this document.
Note: Leave this field blank for directly
connected devices.
Restart timer: Amount of time in seconds before the Terminal
Server retransmits PPP options.
Max Retries:
Number of option retries before dropping
the line.
Dial Timeout: Number of seconds to wait for the modem to
establish link and respond.
Dial Retries:
Number of times to attempt a connection to the
remote site before giving up.
You can setup several modems and use the same name for
each under Remote Site Devices . the Terminal Server will
use the first available modem defined in Remote Site Devices
and if busy, grab the next available.
Dial-out Modem Ports Setup
53