Table of Contents
Advertisement
Terminal Server - User and Administration Guide
LOCK
LOGOUT
PROV
REBOOT
RESUME
RLOGIN
SAVE
114
Syntax:
lock
Description:
This function allows the user to lock his terminal
using a specific password. The server prompts
the user for a password and a confirmation. This
function can not be used unless the Lock enable
flag is set (via set port command).
Syntax:
logout
Description:
This function causes the user to exit the
Terminal Server. The unit closes down any
sessions and resets the port. Same as exit .
Syntax:
prov
Description:
This function displays the network status of each
IP provider and is used for troubleshooting.
Syntax:
reboot
Description:
This function reboots the terminal server.
Admin level is required.
Syntax:
resume <session number>
Description:
This allows user to resume an established
connection if there are multiple sessions going.
Syntax:
rlogin [host] [port]
Description:
This function allows the user to make an rlogin
connection to the specified host machine. If the
port number is not specified then it defaults to 513.
Syntax:
save config
Advertisement
Table of Contents
