Remote Site Devices Screen - Black Box 37687 User And Administration Manual

Terminal Server - User and Administration Guide
Dial-out PAP
Authentication
6.5 Remote Site
Devices
52
\t
\d
\\
\b
If a dial-out script is not used but a username and password
are defined, the Terminal Server will send a PAP packet after
establishing a PPP link and use the username and password
defined for the remote site.
This screen is used to define/setup the modem device. There
are a lot of similarities between this screen and the UUCP
devices file under Unix. It is possible to assign several ports
the same device name, and the dialer daemon will
automatically use the first available port. It is also possible to
have these ports do 'double-duty' and serve as regular dial-in
ports for dumb terminal access, SLIP or PPP in addition to the
dial-out capability.
** Administrator **
Type [modem1
IP Addresses
Src Addr [206.131.227.5
Dst Addr [206.189.134.7
Modem
Config [at
Dial Comm [atdt
Hang Up [+++ath0 ]
PPP Configuration
Restart timer [3 ]
Max Retries [5 ]
Inactivity [0 ]
________________________________________________________________________________
Figure 25: Remote Site Devices Screen.
phone# (sends the telephone number
field).
send the modem's dial command
escapes to '\'.
send a break.

REMOTE SITE DEVICES SCREEN

]
]
]
]
Dialer Configuration
Dial Timeout [40]
Dial Retries [2 ]
REMOTE-ADMIN
]