Table of Contents
Advertisement
Terminal Server - User and Administration Guide
Authentication/
Logging
96
This is the modem's setup string. There are a
Config
few examples at the end of this document.
Note: Leave this field blank for directly
connected devices.
This is the modem's dial command.
Dial Comm
This is the modem's hang up command.
Hang Up
Restart timer Amount of time in seconds before the Terminal
Server retransmits PPP options.
Number of option retries before dropping the line.
Max Retries
Number of seconds to wait for the modem to
Dial timeout
establish link and respond.
Number of times to attempt a connection to the
Dial retries
remote site before giving up.
Number of minutes of inactivity before a PPP/
Inactivity
SLIP connection is broken.
This section outlines the authentication and logging
parameters of the Terminal Server.
** Administrator **
HOST AUTHENTICATION AND LOGGING
Auth Host
[204.17.209.1
Authentication Port
Login Prompt
Password Prompt
Success Indication String [Last
Failure Indication String [incorrect
Maximum Login Attempts
Login Timeout (seconds)
Disconnect Probe
Log Username [tserver
Log File
[tserver.log
Log Power Up/Down
Log Port Connect/Disconnect [Yes]
________________________________________________________________________________
Figure 38: Host Authentication And Logging menu.
[23
]
[ogin:
]
[ssword:
]
]
]
[3 ]
[60]
[No ]
]
[Yes]
Log User Login/Logout
Log User Service Start/Stop [Yes]
REMOTE-ADMIN
]
]
[Yes]
Advertisement
Table of Contents
