Table of Contents
Advertisement
FACRESET
GATEWAY
HELP
HOST
KILL
Some configuration parameters only come into
effect after the user has exited and re-entered
the Terminal Server (e.g. the name field).
Syntax:
facreset
Description:
This function will reset all parameters back to
factory defaults. This option requires confirmation.
Syntax:
gateway <[add dest gate net][delete dest]>
Description:
This function allows the administrator to alter
the gateway routing table. New gateways can
be defined by using the add function, and
gateways removed using the delete function.
When adding, admin level required to change.
Syntax:
help
Description:
This function provides syntax descriptions and
partial descriptions of the available commands.
Syntax:
host <[add nameadress][delete name]>
Description:
This function allows the administrator to add
and remove names from the host table. The
name can be anything up to 18 characters long,
and the address field is the IP address of that
host. There can be a maximum of 10 entries in
the host table. Admin level required to change.
Syntax:
kill <port number>
Description:
This function allows the user to reset their own
port, or the administrator to kill any other ports.
When kill is issued any existing sessions are
terminated and the port set back its starting
state. Admin level required.
Command Line Interface
113
Advertisement
Table of Contents
