Table of Contents
Advertisement
c. Find the interface shell script for this printer
and copy it to a file with the suffix '.orig'. using
the example:
cp hpjet hpjet.orig
d. Copy the Server RCP shell script from the TSSD
support disk to the interface script, e.g:
cp /etc/bbox/src/bbox.rcp hpjet
Having created the hpjet file set the permissions
to allow execution of the script, e.g:
chmod a+x hpjet
e.
Edit the interface script and insert the desired
server name and port number. For example, if the
name is 'iceland' and the printer is attached to
port 8 (numbering from 1 to 16). Then the line:
rcp $TMP <server name>:tty<port number>
becomes:
rcp $TMP iceland:tty8
Some Unix systems may require the full
pathname of the 'RCP' command. For example:
/usr/ucb/rcp $TMP iceland:tty8
f.
Activate the printer for use, e.g:
/usr/lib/accept hpjet enable hpjet
g. Set up the Terminal Server port for RCP printing
by changing the Loca Port field in the Access
section of the Port Setup Menu to 514.
Printing
65
Advertisement
Table of Contents
