Table of Contents
Advertisement
Terminal Server - User and Administration Guide
Downloading
Domain Naming
106
This field should only be filled in if the
Boot host
Administrator wishes to download a new
firmware version. It contains the host name or
IP address of the host machine that has the
Terminal Server download image on it.
This field contains the full path and file name of
Boot file
the Terminal Server download image (including
path name). Boot host required.
This port (if enabled) allows the TFTP download
Boot
state to be displayed on port 1 and is used for
diagnostics
troubleshooting. Boot host required.
This field contains the file name of the Terminal
Init file
Server configuration image. If this field is
present, the unit reads its configuration from this
file whenever it is rebooted. Boot host required.
This field should be filled in with the pathname
MOTD file
of a file on the boot host containing the message
of the day text to be displayed on any selected
ports. A filename or relative pathname entry
assumes the top level directory is /tftpboot . Boot
host required.
This field should contain the domain name for
Domain name
the name server.
This field should contain the host name or the IP
Name server
address of the host machine being used as a
Domain Name Server.
This defines the Windows
WINS server
network and allows dial-in users full access to
the network.
This field contains the TCP port number of the
NS Port
Name Server service on the host machine. The
default value is 53 .
®
name server on the
Advertisement
Table of Contents
