Table of Contents
Advertisement
Terminal Server - User and Administration Guide
6.4 Remote
Access
Systems
50
This screen is used to define a remote system (up to 16
entries per Terminal Server), a phone number, login script,
etc. There are a lot of similarities between this screen and
the UUCP systems file under Unix.
** Administrator **
REMOTE ACCESS SYSTEMS SCREEN
Sitename
[206.189.134.2
User name
[corp
Password
[whodunit
Device type
[modem1
Service type [PPP ]
Inactivity
[5 ]
Phone number [
Login-script [
________________________________________________________________________________
Figure 24: Remote Access Systems Screen menu.
The following fields are important:
Sitename:
The IP name or IP address of the remote site the
Terminal Server will be calling.
User name:
The user name required by the remote system
for logging in. You may use the \u in your login
script in lieu of the full name.
Password:
The above user name's password as required by
the remote system. You may use the \p in your
login script in lieu of the full password.
Device type:
The name of the modem device as defined in the
Remote Access Systems Screen . You may have
several ports setup with the same device type, and
the dialer will use the first available.
If a device for dialing out is not available, the
Terminal Server will return an ICMP 'host
unreachable' message (ICMP type 3 code 1).
]
]
]
]
REMOTE-ADMIN
]
]
Advertisement
Table of Contents
