Table of Contents
Advertisement
Terminal Server - User and Administration Guide
94
The parameters are as follows:
This is the IP name or IP address of the remote
Sitename
site the Terminal Server will be calling.
This is the user name required by the remote
User name
system for logging in. You may use the \u in
your login script in lieu of the full name.
This is the above user name's password as
Password
required by the remote system. You may use the
\p in your login script in lieu of the full password.
This is the name of the modem device as
Device type
defined in the Remote Site Devices screen. You
may have several ports setup with the same
device type, and the dialer daemon will use the
first available. If a device for dialing out is not
available, the server will return an ICMP 'host
unreachable' message (ICMP type 3 code 1).
This specifies which protocol will be used when
Service type
the link is established to the remote site.
Choices are SLIP, CSLIP or PPP.
This is the period of inactivity on the SLIP/PPP
Inactivity
link before the port will drop the call
automatically. Setting this field to 0 turns the
timeout feature off.
This is the phone number of the remote system.
Phone number
The '\' may be used as a delay. For example, a
phone system that requires a 9 followed by a
four-second delay before getting an outside line
would require an entry like 9\4-2145551234.
This is the chat script that will be used to login
Login-script
to the remote system. It takes the form of the
usual Send/Expect chat script you may already
be familiar with. If no script is defined, this step
is skipped (e.g. hardwired connections).
Advertisement
Table of Contents
