Terminal Server - User and Administration Guide
LPD printing
from AIX
LPD printing
from HP/UX
Tips
7.3 Using RCP
62
If the lpsystem command is not performed, the lpadmin
command will return an error indicating that the system
named in the -s parameter does not exist even though the
system is listed in the /etc/hosts file.
Note: Although it is possible to create a printer spool on the
Terminal Server, UNIX lpd queues only print one job at a
time. The host will wait for one job to complete before
spooling the second so all jobs will go to the same queue
and print from the same Terminal Server port.
Use SMIT to configure remote printer.
Use SAM to configure remote printer.
Hunt groups:
The Terminal Server supports hunt groups for
printing. To use this, use the same queue name
in the Terminal Server Port Setup name field.
RCP is used as an alternative option (where LPD and ioland
are not available). It is a Unix only command set. A script is
provided on the Support Disk for RCP.