Table of Contents
Advertisement
General
Administration
This field defines the globally unique ethernet
Ethernet
address of the Terminal Server. This address
address
can not be altered and matches the address
provided on the physical back of the unit. In
the unlikely event of this field being corrupted
please contact your supplier.
This field defines which Ethernet media will be
Ethernet
used. The LAN connectors are autosensing but
interface
you can change this to a specific interface.
This field determines the language the server is
Language
using such as English, French, German, etc.
This field allows the administrator to put in an
Identification
identification string into the unit and is
displayed at the bottom of the server's menus.
This field is for Technical Support use only.
Debug mode
This field determines whether the Lock feature is
Lock
available to all users. If this field is set to
disabled then nobody can use the Lock feature.
This field defines the number of attempts a user is
Password
allowed to enter the correct password for a port.
limit
If the user exceeds this limit, the Terminal Server
disables the port for 5 minutes. The Administrator
can restart the port, bypassing the timeout, by
issuing a kill on that port.
This is the 'carriage return to initiate' field which
CR to initiate
designates that when terminals are setup for
initiated connections, the user must hit
establish a connection. Otherwise, any input will
startup the connection (even noise on the cable).
SNAP
This is an alternate Ethernet encoding (SubNet
encoding
Access Protocol).
The Menu Interface
to
105
Advertisement
Table of Contents
