Table of Contents
Advertisement
Terminal Server - User and Administration Guide
80
This option only appears if there is a current
Resume
connection open. It allows you to carry on
Connection
working on a host.
This option also appears only if the current
Close
connection is open and will close the session on
Connection
a host machine. It is recommended to logout
before closing the connection.
This allows users to change the characteristics
Port
of their serial port. See Port Setup Menu section
of this chapter.
This takes the user into the Administration
Admin mode
Menu (s) (also covered in this chapter).
Selecting this function changes the port back
CLI
into command line or CLI mode. To get back to
the menus use set menu from the CLI prompt.
More information on CLI is in Command Line
Interface (Appendix A).
This function allows the user to lock the port
Lock
they are on for security purposes. When this
function is selected the user is prompted for a
password then asked to verify it again. Once
locked a port can only be unlocked by the
successful entry of the password.
Note: If a user accidentally locks their port the
Administrator can use the kill command on the
Administration Menu to free the port.
This function logs the user completely out of
Logout
the Terminal Server. From the Connections
Menu pressing
the system.
also logs the user out of
Advertisement
Table of Contents
