Media Control - Buttons And Led Patterns - Oce CS4300 User Manual

Media Control – Buttons and LED Patterns
Introduction
Your panel contains LEDs and buttons for controlling the media you insert for scanning.
The following basic functionality applies on all models:
The Paper Ready LED lights up when the media is inserted into the original's insertion
1.
slot and correctly positioned for feeding on a straight path. It lights green for normal
documents and yellow for thick media scanning.
Note:
See also this guide's sections on loading originals and Scanning Thick Media
The media can then be moved into the start-scan position by pressing the Paper Forward
2.
Key or through automatic loading.
The Paper Ready LED will blink during scanning.
3.
The media can be moved back for ejection by pressing the Paper Reverse key.
4.
Overview
#
How it looks on the scanner
Media Control – Buttons and LED Patterns
Description
Paper Forward and Paper Reverse Keys
The Paper Forward Key moves the drawing into
the start-scan position for manual loading (see
section on Loading). If Auto-Load is set, loading
will occur automatically (without pressing the key)
when the original enters the insertion slot. Pressing
the Paper Forward Key during scanning will stop
the scanning process and feed the original through
the scanner while the key is held down. The Paper
Reverse Key stops the current scanning process
and reverses the original. The original will be fed
backwards through the scanner while the key is
held down. When the scanner is in Automatic
Thickness Adjustment Control (ATAC) mode the
paper forward and paper reverse keys become
"pressure-platen up" and "pressure-platen Down"
keys (see below).
Chapter 3 - The Operator's Panel 29