Replacing Scanner Parts - Oce CS4300 User Manual

Replacing scanner parts

Replacing Scanner Parts
Replacing scanner parts
Introduction
This section describes how to replace those scanner parts that are liable to wear down
over long-term use. Changing parts will renew your scanner and reestablish optimal results.
Océ Scanner Agent monitors scanner usage and will warn you when it is time for a re-
placement.
Note:
Regarding Océ Scanner Agent warning flag - glass plate and White background platen
replacement: After receiving a warning by Océ Scanner Agent and replacing the part,
be sure to reset the part replacement warning flag through the Océ Scanner Agent
"Status" tab.
Note:
Regarding RECALIBRATION - glass plate, White background platen, lamp unit re-
placement: Replacing these parts will change conditions in the scan area. Therefore, it
is recommended to recalibrate right after changing and cleaning these parts.
Caution:
Instruction: Before replacing any parts, be sure to turn the scanner power off and discon-
nect the power plug.
72 Chapter 8 - Maintenance