Set The Default Behaviour For The Media Selection - Oce TC4 User Manual

Set the default behaviour for the media selection

Set the default behaviour for the media selection
Definition
In the 'Media' section of a template, you define the way the system will behave when se-
lecting a media for a document.
Media settings
Define the system behaviour regarding:
The 'Media type' selection
The 'Media size' selection
The 'Media source' selection
The lists in 'Media type' and 'Media size' subsections display the media enabled on the
printer. In these lists, each media marked with a green tick is actually loaded on the
printer.
The size of the rolls, the size of the standard sheets and the type of media displayed in
the lists are the sizes enabled on the printer (they can be actually loaded or not on the
printer).
'Media type' selection
Define the 'Media type' selection criteria:
#
'Request media type'
'Prefer media type'
'Use any Media Type'.
108 Chapter 5 - The Océ Publisher Copy option
Select from the list the media (type and size) to be used by
default.
If the selected media is not found when a document is
added to a job, the system displays a warning. You can then
edit the file and select another 'Media type' before printing.
Select from the list the media (type and size) to be used if
available.
If the media of the selected type and of a correct size is not
found when a document is added to a job, the system pro-
poses another media of the correct size, of any other type.
The system proposes a media of the correct size (of any
type).