Oce CS4300 User Manual page 16

Installation
Action
7 Connect interface cable to the
scanner
The cable connector panel is be-
hind the cover at scanner's right
side. You have to remove the
cover to connect the cable. Insert
your thumb in the slot at the top
of the cable connector panel
cover. Push down to snap the lid
open. .
Remove the cover with both
hands
Feed the interface cable's B-con-
nector (square shaped) end
through the opening in the back
of the scanner until it emerges
in front of the cable-connector-
panel. Thenconnect the B-con-
nector to the USB connection
socket on your scanner
Connect the cable and close the
cable connector panel cover
16 Chapter 2 - Installation
Note:
The cover must always
be closed before you
turn the scanner ON.
Note:
Your scanner product
has been tested to com-
ply with the EMC Stan-
dards EN55022 and
FCC, Part 15. To main-
tain compliance, only
use the interface cables
supplied with the scan-
ner.
Remarks