Oce CS4300 User Manual page 67

Action
4 Clean the white-background
platen and upper rollers
The white-background-platen
(white metal area) is fixed in the
scanning area lid. The upper
rollers are aligned in 2 rows on
each side of the white-back-
ground-platen.
1. Hold/support the lid in its
open position for support as you
clean.
2. Use a lint-free cloth and a
mild, streak-free, glass cleaner.
Apply the cleaner to cloth and
wipe the white-background-
platen.
3. After wiping clean the whole
white background platen, wipe
all the upper rollers in both rows.
4. Dry the platen and rollers
completely using separate clean,
dry lint-free cloths.
Caution: Do not spray liquids
directly onto the scan area.
5 Clean the lower rollers
The lower rollers are the black
rubber rollers aligned in 2 rows
on each side of the glass-platen.
1. Use a lint-free cloth and a
mild, streak-free, glass cleaner.
Apply the cleaner to cloth and
wipe the lower rollers in both
rows. 2. Dry the lower rollers
completely using a separate
clean, dry lint-free cloth.
2. Dry the lower rollers complete-
ly using a separate clean, dry lint-
free cloth.
Caution: Do not spray liquids
directly onto the scan area.
Remarks
Chapter 8 - Maintenance
Cleaning the Scan Area
67