Setting The Input Size - Oce CS4300 User Manual

Setting the input size

Setting the input size
The Input size defines the scan area. You enter the input size in your application's input
size dialogs.
Note:
The availability of the Input size options described below will depend on your scan/copy
software and its level of compatibility with the scanner model.
3 ways to set find and set the input size:
Use automatic size detection
1.
The scanner will detect the edges of the document and calculate the input size for you.
Set a standard size
2.
Common standard sizes are marked on the scanner bed.
Use these markings to determine which standard size matches the original and then select
that size in the application's input size dialog.
Set the size manually for irregular sizes.
3.
To measure your document - use the scanner's ruler just above the insertion slot. Enter
your width measurement in the width setting field in your application's input size setup
dialog. You can measure and set a length value or choose automatic length detection.
52 Chapter 5 - Loading Originals into the Scanner