Oce CS4300 User Manual page 19

Action
12 Switch on your PC and start
Windows.
Windows will detect the new
hardware (scanner) during start-
up and the drivers you installed
in step 2. will be recognized.
Follow Windows' hardware in-
stallation instructions should any
appear on your screen.
13 Verify correct scanner installa-
tion:
1. Locate the scanner icon on the
Windows System Tray.
2. Left -double-click on the pro-
gram icon.
3. Your scanner is installed and
detected if your scanner's name
appears at the top of the tab dia-
log.
4. If the scanner was not in-
stalled correctly, a message will
inform you that your scanner
could not be detected.
If this is the case turn off power
to all connected devices and re-
peat the installation steps.
Remarks
Chapter 2 - Installation
Installation
19