Oce CS4300 User Manual page 25

How it looks on the scanner
Power Control, Buttons and LED patterns
What it means
Self-Adjustment (startup –phase 3)
On completion of the Init Sequence, the power
LED (green) and the Wait LED (yellow) remain
lighted while the others LEDs turn off. This indi-
cates that the scanner is running its Self-Adjust-
ment of light profiles, stitching and black/white
points.
Note:
To maintain optimal conditions, the
scanner runs new Self-adjustment proce-
dures periodically during the day (without
lighting the wait LED). If the Wait indica-
tor blinks, the scanner needs to run Self-
Adjustment but cannot
Scanner Ready (startup – phase 4)
When the Wait LED turns off, and only the
Power LED is ON and lights green, self-adjust-
ment is completed and the scanner is ready to scan.
Chapter 3 - The Operator's Panel 25