Installation - Oce CS4300 User Manual

Installation

Installation
Introduction
Follow the steps below for a quick and easy installation of your scanner and scanner
drivers
Attention:
Do not connect the scanner to the power or the PC.
Attention:
You must install your scanner's drivers and tools before you connect the scanner or install
any scanner software applications.
Caution:
The scanner is equipped with a three-wire (pin) grounding type plug. If you cannot insert
the
#
Action
1 Set up the scan station.
Your scanner should be placed
either on the specially designed
stand-alone floor stand or on a
sturdy table. Make sure there is
enough space behind the scanner
to allow the media to run out.
12 Chapter 2 - Installation
Remarks
Note:
: DO NOT YET CONNECT
THE SCANNER TO POWER
OR PC.