Running Applications From The Scanner Panel - Oce CS4300 User Manual

Running applications from the scanner panel

Definition
Normally you would control the scanner from your PC through your scan software user
interface.
However, your scanner also supports one-touch buttons that enable you to trigger your
software from the scanner panel. When a button is pressed, a scan is initiated and the
result is loaded into the application triggered.
You configure your one-touch buttons through Océ Scanner Agent and your compatible
scanning software. Please refer to the on-line help in these applications for instructions.
Note:
See Appendix A – Overview of the Operator's Panel - Application Control – One Touch
Scan for additional information.
Illustration
Running applications from the scanner panel
Chapter 6 - Scanning 55