Oce CS4300 User Manual page 13

Action
2 Install drivers and tools on
your PC.
1.Insert the CD-ROM into your
PC. Normally the setup program
interface will start automatically.
If it does not, locate the set-
up.exe file on the CD and start
it manually.
2. Follow the installation wizard
to install the software.
3. Remove the CD-ROM when
installation is complete.
Note:
: You must install your
scanner's drivers and
tools before you connect
the scanner or install any
scanner software applica-
tions.
3 Shut down the PC.
Your PC must be powered off
before connection with the
scanner.
4 Disconnect the power plug.
Note:
This step is to ensure
your own personal safety
and to help protect your
device from potential
damage.
Remarks
Chapter 2 - Installation
Installation
13