Oce CS4300 User Manual page 30

Media Control – Buttons and LED Patterns
How it looks on the scanner
30 Chapter 3 - The Operator's Panel
Description
Paper Ready LED Green - Ready for Normal me-
dia
The Paper Ready LED lights green when normal
thin media is positioned correctly in the insertion
slot and stays green when the media is moved to
the start-scan position. From there, scanning can
be controlled from the computer.
Paper Ready LED blinks Yellow – Scanner in
ATAC mode
When you press the ATAC key, you set the scan-
ner in ATAC mode. The Paper Ready Key blinks
yellow to indicate ATAC mode. The Paper For-
ward and Paper Reverse keys become "Pressure-
platen Up" and "Pressure-platen Down" keys.
Paper Ready LED Yellow - Ready for Thick media
The Paper Ready LED lights yellow when the
scanner is ready to scan thick media. The pressure-
platen has been lowered and the media is posi-
tioned correctly in the scanner. The scanner goes
automatically out of ATAC mode. The Paper
Forward and Paper Reverse keys resume their
normal functionality so you can move the thick
original forwards and backwards in the scanner.
Scanning can be controlled from the computer.
Paper Ready LED blinks – (green or yellow) –
Media is being scanned
The Paper Ready LED blinks during scanning.
On completion of the scan, the Paper Ready LED
will stop blinking. Scanning can then be repeated
from the computer or terminated by ejecting the
media from the scanner. The above behavior ap-
plies for both thin media scanning (green blinking)
and thick media scanning (yellow blinking).