Oce CS4300 User Manual page 26

Power Control, Buttons and LED patterns
How it looks on the scanner
26 Chapter 3 - The Operator's Panel
What it means
Wake-up / Sleep - Turn power ON/OFF with
power key – normal use (with main power switch
always ON)
With the outlet switch always ON, use the Power
key to control scanner power. Hold down on the
Power key to toggle power into Wakeup and Sleep
modes. The Power LED lights green when the
scanner is ON (Wake-up) and red when power is
OFF (Sleep). When you turn the scanner ON in
this manner, it skips the init sequence and starts
with Self-Adjustment as described above for startup
phase 3.
When in the power Wake-up/Sleep mode: The
scanner can be manually powered up and down
(wake and sleep) by pressing and holding down
the power button or inserting a document for
scanning.
See Power, Wake/sleep and Adjustment.
The scanner can automatically be powered up and
down (wake-up/sleep) by Océ Scanner Agent timer
or idle time setting.
See Automatic Power functions
Green Power LED blinking
The green power LED will blink just before the
scanner automatically powers off because its de-
fined automatic Sleep time (in WIDEsystem) has
been reached in the timer. If you are still using the
scanner and want to cancel the timer controlled
Sleep mode, press the power key until the LED
stops blinking. You can at any time disable or
change timer settings in Océ Scanner Agent (see
Océ Scanner Agent on-line help for details).