The Selection Buttons - Oce 3000 User Manual

Display
All display modes are available during the scanning process and during the
viewing (browsing) after drawings have been scanned. The different display
modes are described in detail in 'Choosing a display mode' on page 34.
Utilities
options. The Configuration option is described in 'Configuration' on page 85.
Clean Drum is described in 'Cleaning the drum' on page 98.
This is a pull down menu allows you to view a selected image data file.
View
The Viewing mode is described in chapter 4.
The Help option provides on-line context sensitive help on all aspects of
Help
the system operation. Clicking the Help option during operation will display
information concerning the process (this option is not available below version
3.1).

The selection buttons

There are four main selection buttons which are placed at the top of the Control
window. Each of these opens a setup dialogue box.
[7] The selection buttons
Scanner setup
window. It provides all the setup tools related to the scanner. You can find more
information in 'The scanner setup' on page 44.
Printer setup
window. It provides all the setup tools related to the printers. You can find more
information in section 'The printer setup' on page 71.
File Handling
window. It allows setting up the details of the output files, file naming etc.
More information is in 'The file handling setup' on page 88.
Job Management
Management window. It allows setting up the log file and file size limits for the
job. More information is in 'The Job Management Menu' on page 91.
20 Océ 3000 User Manual
This pull down menu selects one of the three possible display modes.
This pull down menu provides the Configuration and Clean Drum
Clicking the Scanner Setup button brings up the Scanner Setup
Clicking the Printer Setup button brings up the Printer Setup
Clicking the File Handling button brings up the File Setup
Clicking the Job Management button brings up the Job