Replacing The - Oce CS4300 User Manual

Action
8 Each lever is attached to the
scanner chassis with a small hook
that rests on a round pin. As you
hold the glass-plate on both its
edges, lift it upwards to detach
both lever's hooks from the pins
and thus free the glass-plate from
the scanner.
9 Reverse the above operations to
reinsert a new glass-plate –
Carefully set the new glass plate
down into the scan area. Fit the
new glassplate's lever hooks on
to the round pins on each side
of the scanner as shown.
10 While supporting the glass-plate
with fingers on the lever handles,
carefully ease the glass-plate
down backwards (away from
your body) so it falls into place.
Remarks
Chapter 8 - Maintenance
Replacing the glass-plate
75