The Scanner's Self Test Procedure - Oce CS4300 User Manual

The scanner's Self Test Procedure

Introduction
When you connect the scanner to the power outlet and turn on the outlet switch at the
back of the scanner, it starts up with a self-test procedure.
The scanner's self-test procedure consists of two main steps:
Init (Initialization) Sequence
1.
The scanner loads and tests internal parameters.
Only initiated when you turn the main power ON.
The panel's LEDs will be lit as shown in the next illustration:
Chapter 4 - Turning Power ON/OFF - Wake/Sleep Mode
The scanner's Self Test Procedure
35