Sensor For The Cl Drive Cam - Brother GT-3 Series Service Manual

6. Replacing Parts

6-1-24. Sensor for the CL Drive Cam

Required Tool
・Phillips screwdriver
Disassembling
1.
Remove the Maintenance Unit. (Refer to "6-1-16. Assembling / Disassembling of the Maintenance
Unit". )
2.
Remove the Screw (2) that fixes the Cap Sensor Holder.
3.
Remove the Connector (3) and the Sensor (4).
Replacement & Assembling
1.
Replace to the new Sensor (4) and connect the Connector (3).
2.
Confirm that the claws (5) of the Sensor are fixed properly.
194
(1)
(2)
(4)
(4)
(3)
(4)
GT-3 Series
Inlet of the connector
(5)