Ffc - Brother GT-3 Series Service Manual

6-2-22. FFC

Disassembling
1.
Remove the AC Cord and open the Cover UB.
2.
Remove the Cover DR (right side). (Refer to "6-1-2. Assembling/Disassembling of the Covers".)
<Note> The operation will be easier to remove the four Screws (1) and the Connector (2), and the
Exhaust Fan (3) beforehand.
(1)
3.
Remove the two FFC Connectors (4) that are connected to Carriage PCB Assy.
Remove the FFC Cable by removing all the nine Clamps (5) for fixing the FFC.
<Note>
Refer to the page "How to connect/disconnect the FFC Connector" in "6-2-18. Carriage PCB Assy" when
you handle FFC Connectors.
(5)
(4)
(5)
GT-3 Series
6. Replacing Parts
(3)
(2)
(5)
(5)
343