Power Unit - Brother GT-3 Series Service Manual

6-2-10. Power Unit

Disassembling
1.
Remove the AC Cord and remove the Cover DR (right side). (Refer to "6-1-2. Assembling/Disassembling
of the Covers".)
2.
Remove the Ferrite Core from the Cord Clamp. (Refer to "6-2-7. Main PCB Assy)
3.
Remove the two screws (2) that fix the Power Cover (1)
Pull out the Power Cover (1) to your side and lift it to remove.
(2)
4.
Remove the two connectors (3) that connect to the Power Unit. Remove the four screws (4) that fix the
Power Unit.
5.
Remove the Power Unit.
6.
Follow the reverse steps in reassembling.
(1)
(2)
(3)
GT-3 Series
(1)
(4)
6. Replacing Parts
323