Replace The Pump Sensor - Brother GT-3 Series Service Manual

6. Replacing Parts

6-1-21. Replace the Pump Sensor

Required Tool
・Phillips screwdriver
Disassembling
1.
Turn OFF the printer.
2.
Remove the Cover PB and DB. (Refer to "6-1-2. Assembling/Disassembling of the Covers".)
3.
Remove the connector (1) and remove the two Screws (2) that fix the Sensor Holder of the Suction Pump.
1
188
Suction Pump Assy
2
GT-3 Series