Brother GT-3 Series Service Manual page 73

2. Setting up GT-3 Series
Installing the Color Ink
1.
Remove the Color Filter Cartridges.
2.
Insert the Color Ink Cartridges into the slots.
Confirm the color of the Label on the Cartridge Holder and the color of the ink cartridge. Insert them in the
proper slots.
3.
Select [ Maintenance ] > [ Initial Cleaning ] from the menu and load the ink.
4.
Select the color that you are going to install the Ink.
Select [ All Colors ] to install the four Color Inks in one time. The printer will install one by one; it takes
about 50 seconds to install one color. The pong sound rings and the installation for W1 is finished
successfully.
5.
Select the color one by one when you install only one color. Repeat the process until you finish the
installation.
64
GT-3 Series