Brother GT-3 Series Service Manual page 223
Garment printer
Hide thumbs
Also See for GT-3 Series:
- Basic operation manual (91 pages) ,
- Instruction manual (18 pages) ,
- Maintenance manual (17 pages)
Table of Contents
Advertisement
6. Replacing Parts
3.
.
Loosen the Screw (2) and remove the Guard Bar (1). Use a coin to loosen the Screw (2).
Loosen the Screw (2) and remove the Guard Bar (1). Use a coin to loosen the Screw (2).
4.
4.
Remove the five screws (3) and dismount the Cartridge Front Cover.
Remove the five screws (3) and dismount the Cartridge Front Cover.
(3)
5.
5.
Remove the two Screws (3) and remove the two Clamps, NK-18N (4).
Remove the two Screws (3) and remove the two Clamps, NK-18N (4).
6.
6.
Remove the four Screws (5) to loose the two Tube Holder Fixes (6).
Remove the four Screws (5) to loose the two Tube Holder Fixes (6).
<Note> Do not disassemble the Tubes from the Tube Holder Fixes.
<Note> Do not disassemble the Tubes from the Tube Holder Fixes.
214
(1)
(2)
(4)
(3)
(6)
(5)
GT-3 Series
(3)
Advertisement
Table of Contents
