Brother GT-3 Series Service Manual page 138

4.
Remove the two Bolt Sockets (6) and disconnect the Belt Setting Plate (7) from the Platen Arm (8).
5.
Remove the four Bolt Sockets (9) and remove the Belt Holder (10).
6.
Remove the Platen Belt.
<Note> Go to the page "Replacing the Reduction Belt" and follow "Disassembling" when you replace the
Reduction Belt at the same time.
(8)
(6)
(9)
(10)
(8)
GT-3 Series
6. Replacing Parts
(7)
129