Setting Up Gt-3 Series; Setup Requirements; Environment - Brother GT-3 Series Service Manual

2. Setting up GT-3 Series

2-1. Setup Requirements

2-1-1. Environment

Locate your printer taking the following into account
1.
The printer in installed in environmentally-acceptable conditions. (Refer to "1. About GT-3 Series".)
2.
Avoid exposure to direct sunlight, dust, extremes of humidity. (Using the humidifier in dry conditions is
strongly recommended for print quality).
3.
Never use an extension cable.
4.
A working space must be left around the printer.
Minimum space of 100 cm (39.4 inch) on the front and the right. Keep away from the right side of the
Exhaust Fan at least by 20 cm (7.9 inch).
5.
The body size is approximately 137 cm × 104.5 cm × 66 cm. (53.9" × 41.1" × 26.0"), and the weight is
approximately 111 kg (245 lb).
6.
The table that supports the printer should be at least 137 cm (53.9 inch) in width and 104.5 cm (41.1
inch) in depth, and should be able to bear a weight of 150 kg (330 lb) or more. Its tabletop must be level.
.
GT-3 Series
2. Setting up GT-3 Series
[cm]
0051Y
11