Brother GT-3 Series Service Manual page 19

1. About GT-3 Series
Menu
Printer Setting
Total Print
Platen Reset
Language
Version
10
Goes into the Printer Setting.
LCD Contrast: Adjusts the Display contrast.
See "3-4-1. Adjusting the Display Contrast" in the Instruction Manual.
Speaker Volume: Adjusts the speaker volume. See "3-4-2. Adjusting the
Speaker Volume" in the Instruction Manual.
Temperature: Sets Fahrenheit / Centigrade. See "3-4-3. Temperature" in the
Instruction Manual.
Auto Cleaning Interval: See "7-2-5. Changing the Auto Cleaning Setting " in the
Instruction Manual.
CR Speed Adjustment: Adjusts the increase/decrease of the Carriage speed.
See "7-2-9. Adjusting the CR Speed" in the Instruction Manual.
Flushing Interval: Adjusts the number of lines (interval) to flush ink in printing.
See "7-2-10. Adjusting the Flushing Interval" in the Instruction Manual.
Flushing Volume: Adjusts the ink volume in flushing. See "7-2-11. Adjusting the
Flushing Volume" in the Instruction Manual.
Daily Cleaning W Setting: Adjusts the amount of White Ink that is flushed in Daily
Cleaning White. See "7-2-12. Adjusting the amount of White Ink in Daily
Cleaning White" in the Instruction Manual.
Auto Job Delete: Deletes the print data automatically after the print number
which is set with Printer Driver is finished. Default is OFF.
GT-341 mode (No White): Sets the printer to stop all the operation of White
Heads. See "6-2-５. Required Maintenance for the Long Storage" in the
Instruction Manual.
Shows the number of prints.
Restores the Platen.
Sets the language shown on the display. See "3-4-4. Language" in the Instruction
Manual.
Shows versions of the firmware.
Content
GT-3 Series