Drum Drive Assy/ Drum Phase Sensor Pcb Assy 1, 2 - Brother HL-4040CN Service Manual

8.48 Drum Drive ASSY/ Drum Phase Sensor PCB ASSY 1, 2

(1) Remove the Engine insulation sheet from the Harness shield plate, which is fixed with a
two-sided adhesive tape.
Harness shield plate
Engine insulation sheet
(2) Remove the three cup S M3x6 Taptite screws, and then remove the Harness shield plate
from the Frame unit.
Taptite, cup S M3x6
(Tightening torque:
0.80 ±0.1 N m)
Harness shield plate
Taptite, cup S M3x6
(Tightening torque:
0.50 ±0.1 N m)
Taptite, cup S M3x6
(Tightening torque:
0.80 ±0.1 N m)
Fig. 3-142
Frame unit
<Left side>
Fig. 3-143
<Left side>
3-99 Confidential