Program A Non-Scanning Job - Pitney Bowes relay 3000 Operator's Manual

2 • Program a Job

Program a Non-Scanning Job

Follow this sequence of steps to program a non-scanning job.
NOTE: If scanning is not available on your system, begin with "Set Accumulation."
Disable OMR Scanning if Functionality Exists
If scanning is enabled on your system, set it to OMR off.
1. When prompted, press Change (+/-) to select OMR off.
2. Press Next (►) to accept the selection and advance to the next
setting.
Set the Fold Type
1. Press Change (+/-) to scroll through the fold types.
2. Press Next (►) to accept the fold type and advance to the next
setting.
Fold Types
C - Letter
When the fold type is selected, the display indicates the correct orientation
of the paper for loading into the feeders:
NOTE: For accumulation jobs, DO NOT manually change the automatic fold length
dimensions at the Fold A and Fold B settings.
2-14
Z - Accordion
FACE UP
HEAD FIRST
Double
FACE DOWN
FEET FIRST
Single
SV63140 Rev. A