Pitney Bowes relay 3000 Operator's Manual page 35

Manual Feed Option
• The manual feed setting allows you to run stapled sets of up to five
sheets - a maximum of 100 lbs.(400gsm) per set. The maximum
compressed thickness of the set after folding must not exceed 0.08
inches (2mm).
• The inserter waits for manual insertion of each set into sheet feeder 1
after which it will fold and insert the set automatically.
• When running manual feed mode, sheet feeder 2 becomes inoperable.
• The manual feed option is only available when Accumulation is set to
OFF.
Set Second/Supplementary Sheet Feeder
If you want to use the second sheet feeder use these settings.
1. Press Change (+/-) to scroll through the options. (Refer to the Second/
Supplementary Sheet Feeder Options, Non-Scanning Jobs table for
descriptions)
2. Press Next (►) to accept the option and advance to the next setting.
Second/Supplementary Sheet Feeder Options (Non-Scanning Jobs)
Icon Option
On Double Detect
On
Off
SV63140 Rev. A
Program a Job • 2
Description
Feeder on with the double detector
operating. (The double detector stops
the inserter if two or more sheets feed
simultaneously.)
Feeder on without the double detector.
Feeder turned off for this job.
2-17