This section provides step-by-step instructions for setting up and saving
a new canning or non-scanning job and saving it using the control panel.
Programming a job is typically a Supervisor activity.
Navigate Using the Control Panel
Use the setup buttons to navigate the job programing options. To help
visually guide you through the programming sequence, an asterisk (*)
flashes on the control panel display next to the area being set.
•
To access the setup buttons, open the hinged cover to the right of the
display screen.
•
Use the Prev (◄) and Next (►) buttons to scroll through the available
settings.
•
Once the desired setting displays, use the Change (+/-) buttons to
select options or set values within the settings.
SV63140 Rev. A
Program a Job • 2
2-3