Pitney Bowes relay 3000 Operator's Manual page 95

Insert Feeder
Minimum Insert Size: 5 inches (127mm) width
Maximum Insert Size: 9 inches (230mm) width
Paper Weights: 20 lbs. (75gsm) minimum (non-folded cut sheet)
Pre-folded or single panel inserts should be fed from the insert feeder.
Double Document Detector
Material Range:
Feed Tray Capacity:
Sealer
The inserter seals up to a maximum of 1,200 envelopes between refills.
Stacker
The envelope stacker accommodates up to 150 filled envelopes
(depending on size and contents of the envelope).
Material Requirements
• For best performance, use only materials approved by Pitney Bowes
• Materials should be good quality and properly stored.
• Recommended storage conditions
- 65°F (18°) to 77°F (25°C)
- 40% to 60% relative humidity
SV63140 Rev. A
3.25 inches (82mm) length
6 inches (152mm) length
50 lbs. (180gsm) maximum (single sheet)
16 lbs. (60gsm) minimum (folded material)
Inserts of up to a maximum compressed thickness of
0.078 in. (2mm)
16 lbs. (60gsm) minimum
32 lbs. (120gsm) maximum
Up to a maximum of 300 inserts
Material Specifications • 7
7-5