Pitney Bowes relay 3000 Operator's Manual page 15

Start - Press to start automatic operation.
7
Stop - Press to stop automatic operation at the end of the
8
next cycle.
Reset Counter - Press to reset the item or batch counter.
9
Job - Press to scroll through the jobs programmed in the
10
inserter's memory. You can program up to 20 jobs in the
inserter.
Default - Press to return the inserter to its default or standard
11
settings. These settings come pre-configured from the factory,
but a Pitney Bowes Service Representative can modify for
your specific application.
SV63140 Rev. A
System Overview • 1
1-7