Table of Contents
Advertisement
2 • Program a Job
Set the Insert Feeder
Select whether you want to use the insert feeder and how it will be used.
1. Press Change (+/-) to scroll through the options. (Refer to the Insert
Feeder Options table for descriptions.)
2. Press Next (►) to accept the option and advance to the next setting.
Insert Feeder Options
Icon
Option
On Double Detect
On
Off
Set the Mode Type - Insertion or Fold-Only
This setting only appears if Accumulation is not turned on.
The inserter needs to know if the job requires inserting material into an
envelope or if it is a fold-only job.
To set the mode type:
1. Press Change (+/-) to toggle between the options.
•
Insertion Mode
Activates the envelope feeder for a normal inserting job.
•
Fold-Only Mode
Turns the envelope feeder off and sets the inserter to act as a folding
module.
2. Press Next (►) to accept the mode type and advance to the next
setting.
2-18
Description
Feeder on with the double detector
operating. (The double detector stops
the inserter if two or more sheets feed
simultaneously.)
Feeder on without the double detector.
Feeder turned off for this job.
SV63140 Rev. A
Advertisement
Table of Contents
Troubleshooting
