Pitney Bowes relay 3000 Operator's Manual page 88

6 • Troubleshooting and Error Messages
Message
CLEAR SEALER
CLOSE COVER
CLOSE MAN ADV
COVER
DEFLECTOR
ERROR
DOUBLE FEED
DOUBLE FEED
CHECK STACKER
FOLD PLATES
NOT SET
MANUAL FEED
TIMEOUT
6-10
Material is detected in the sealer brush area.
• Open the tinted plastic cover on left side of the
inserter and remove any material.
• Close cover and restart.
Cover indicated is not fully closed. Close the
indicated cover and restart the inserter.
The manual advance knob door is not fully closed.
Close the door.
The function of half fold is not possible due to
a fault. Remove fold plates and check for any
material.
A double feed has been detected from the feed tray
indicated.
• Remove the material from the inserter and
restart.
• If double feeds persist, request another trial
piece.
A double feed has been detected from the feed tray
indicated.
• Remove the double feed from the stacker
• Restart the inserter.
The fold plates has not set to the correct position.
• Remove fold plates and check for any material.
• Install the fold plates and restart the inserter.
Material feed has not been detected within a
predetermined time.
• In manual feed mode, you must feed material
within a set time.
• Restart the machine by pressing Start.
Action
SV63140 Rev. A