Pitney Bowes relay 3000 Operator's Manual page 8

Document inserting system with a standard control panel
Hide thumbs Also See for relay 3000:
Table of Contents

Advertisement

Safety
Never use aerosol dusters labeled flammable and always read
instructions and safety precautions on the duster container label.
Operation of this equipment without periodic maintenance will inhibit
optimum operating performance and could cause the equipment to
malfunction.
Always follow specific occupational safety and health standards for
your workplace.
To reduce the risk of fire or electrical shock, DO NOT attempt to
remove covers or disassemble the control panel or its base. The
cabinet encloses hazardous parts.
Before operating the main inserting machine with this device, make
sure the machine has been properly prepared and that any other
personnel in the area are standing clear of the inserter.
Immediately report to service any damaged or non-functioning
components that renders the unit unsafe.
Contact your system supplier for the following:
- Supplies
- Material Safety Data Sheets
- If you should damage the unit
- Required maintenance service schedule
If Your Stacker has an AC Adapter:
Use only the AC adapter designed specifically for the stacker. Third
party AC adapters may damage the unit.
To protect against electrical shock, plug the AC adapter power cord
into a properly grounded wall outlet.
DO NOT route the AC adapter cable over sharp edges or trap it
between furniture.
IMPORTANT: Some of the inserter features and options covered
in this content may not be available on your inserter.
vi
SV63140 Rev. A

Advertisement

Table of Contents
loading

Table of Contents