Function Settings - Toshiba e-STUDIO170F Service Manual

4.

Function Settings

Function settings are mainly divided into two groups, function settings that can be performed by the
users, and function settings that can be performed by service technicians only. The contents and oper-
ations are different between the two, so select the appropriate mode for each required setting.
4.1 User Function Settings
The User Function Settings are used to set various requirements for the user at the time of installing the
machine and after the machine installation. The function setting is done by either a menu-selection
method or by setting the numeric value. It is possible to select any function by pressing the [MENU] key,
then the [ ] and [ ] keys, then [ENTER], or the numeric key for that function. For the initial value list,
refer to P.12-1 "12. Appendix".
Remarks:
• To select a menu item, you may use the [ ] and [ ] keys to highlight the required item fol-
lowed by pressing the [ENTER] key, as described above, or you may directly enter the item
number through the numeric key.
• The keystrokes needed to access the various function settings will be shown with uppercase
letters and brackets. For example, [MENU] or [ENTER] means to press the Menu Key or the
Enter Key.
January 2005 © TOSHIBA TEC
4 - 1
e-STUDIO170F Function Settings
4