Toshiba e-STUDIO170F Service Manual page 41

(3) Prepare new recording paper sheets by holding both ends and flexing several times. This will
separate the sheets and provide optimum feeding. Align the stack so that all four corners are
neatly aligned. Be sure to load the recording paper in accordance with any paper manufacturer's
printing side instruction. Some papers have a preferred image side. This image side should be
placed face up in the recording paper tray.
Note:
Do not fan the paper. Make sure that the corners of the paper are neatly aligned.
(4) Insert up to 250 sheets into the recording paper tray.
Notes:
• Do not exceed the upper stack limit line as this may cause paper mis-feeds.
• Do not add paper on top of the paper already in the facsimile unit.
January 2005 © TOSHIBA TEC
Fig.3-19
Fig.3-20
3 - 15
e-STUDIO170F Installation
3